Magically Magnetic, Inc.

Homepage | Order By Mail | Customer Service | About Us | Shopping Cart | Contact Us

Go Back

Black or White Magnetic Wall Vent Covers in Custom Sizes


Magnet Vent Cover Here is a great way to stop a draft or redirect air flow to needed areas for added comfort. Just place a magnetic sheet vent cover over any steel wall vent. These vent covers are available in black or white magnet. Each magnetic vent cover is custom cut to size to your specifications. The magnetic vent covers are made from the thickest quality magnet available to stick to a steel vent. Be sure to test your vent with a magnet to make sure it is steel.

Simply measure the height and width of your steel vent and contact us with your dimensions. We can cut them to most any custom size, but we are restricted to 40 inch wide white material and 24 inch black material. The 30-mil thick, high-quality, american made, magnetic cover can be painted or wallpapered to match any room decor.

This product is intended for use on steel wall and floor vents. Installs easily, magnetically seals steel register vents. Trims easily with scissors if necessary. This is a custom item, please contact us with your request or call us at 724-352-3747. See below for special lightweight ceiling vent covers.

  • How Prices are Determined
    Prices are determined by the size of your vent in square inches. Multiply the height by the width and then multiply by $.04. This will give you the price before shipping is added.


  • Non-returnable, non-refundable
    Vent covers are a custom cut product. They cannot be returned for a refund. Please be sure of your measurements before you place your order. Also, be sure to test your vent with a magnet to make sure it is steel. The magnet must make good solid contact with the flat steel areas of the vent to stick. Thin louvers will not present a good magnetically attractive surface for the magnet. Screw heads sticking up may hold the magnet away from the flat surface of the vent and prohibit it from sticking. Screws with countersunk heads should be substituted for raised screw head screws. Control handles for vents can be in the way of the magnet and keep it from sticking to the flat steel areas. The magnet is easily trimmed or cut with scissors so you may be able to adjust the magnet for protruding control handles. All vents are different and we have no way of knowing if sheet magnet will solve your particular vent problem. Please make all necessary tests to determine the usability of our vent cover for your purposes before ordering. The responsibility for determining if our magnetic sheeting is what you want rests with you.

  • Additional Shipping Charges May Apply
    On some larger sizes, vent covers must be shipped via UPS and the shipping costs are higher than standard Priority Mail shipping. Be sure to ask about the shipping charge when placing your order.

  • Larger Vent Covers Must Be Shipped Rolled
    After you receive your vent cover it is necessary to get the magnet to lay flat before trying to stick it to your vent. A sheet magnet with a memory curve will not stick well as it will curl away from the vent. One way to help get rid of the memory of a roll is to roll the magnet again against the curve caused by rolling it for shipment. Sticking it on a flat metal surface like the side of your kitchen fridge for a couple of days will also help. It may also help to heat the magnet with a hand held hair dryer while it is stuck to your fridge.

  • All Air Conditioning and Heating Vents Are Not Created Equal
    Some vents are flat and others are curved and multi-layered. Some have a vent control handle in the center or off to one side. Some are plastic, or aluminum while most are steel. Some have more thin louvers than others and some have more flat surface area than others. It is necessary for the vent to have sufficient flat areas of steel for the sheet magnet to stick to. Unfortunately, we can not accept returns for custom cut vent covers.
  • Contact us to order your vent covers today!
    Please mention the style of vent cover when contacting us.



    Special Lightweight Magnetic Ceiling Vent Covers in Custom Sizes

    All vents are made differently and ceiling vents can be more difficult to cover with magnetic covers because they are flat against the ceiling and gravity pulls down so much more strongly on the entire magnet at the same time. 30 mil sheet magnet is not light. If there is not enough flat steel on the vent to hold the magnet, it can fall easily, especially if there is air pressure behind the cover. For this special need we have created our special lightweight magnetic ceiling vent covers. They are made of heavy duty white sheet vinyl with a border of solid 60 mil sheet magnet around the outer edge. This magnet will make good solid contact with the flat steel of the vent. Magnet touching the thin edges of the louvers of the vent will do little to hold the magnet's weight. Only magnet touching flat steel will hold the cover. Be sure to test your vent with a magnet to make sure it is steel. Carefully measure your vents before placing your order. Our covers will fit only as well as you measure.

    Magnet Vent Cover

     

    This is a custom item, please contact us with your request or call us at 724-352-3747.

  • How Prices are Determined
    Prices are determined by the size of your vent in square inches. Multiply the height by the width and then multiply by $.04. This will give you the price before shipping is added. Prices are determined by the size of your vent in square inches. Multiply the height by the width and then multiply by $.04. This will give you the price before shipping is added.

  • Non-returnable, non-refundable
    Vent covers are a custom cut product. They cannot be returned for a refund. Please be sure of your measurements before you place your order. Also, be sure to test your vent with a magnet to make sure it is steel. The magnet must make good solid contact with the flat steel areas of the vent to stick. Screw heads sticking up may hold the magnet away from the flat surface of the vent and prohibit it from sticking. Screws with countersunk heads should be substituted for raised screw head screws. Control handles for vents can be in the way of the cover and keep it from sticking to the flat steel areas. All vents are different and we have no way of knowing if this vent cover will solve your particular vent problem. Please make all necessary tests to determine the usability of our vent cover for your purposes before ordering. The responsibility for determining if our vent cover is what you want, rests with you.

  • Additional Shipping Charges May Apply
    On some larger sizes, vent covers must be shipped via UPS and the shipping costs are higher than standard Priority Mail shipping. Be sure to ask about the shipping charge when placing your order.

  • All Air Conditioning and Heating Vents Are Not Created Equal
    Some vents are flat and others are curved and multi-layered. Some have a vent control handle in the center or off to one side. Some are plastic or aluminum while most are steel. Some have more thin louvers than others and some have more flat surface area than others. It is necessary for the vent to have sufficient flat areas of steel for the sheet magnet to stick to. Unfortunately, we can not accept returns for custom cut vent covers.
  • Contact us to order your vent covers today!
    Please mention the style of vent cover when contacting us.



    Special Lightweight Ceiling Vent Covers for Non-magnetically Attractive Vents

    Some vent plates are made of plastic or aluminum. These materials are not attractive to magnets and will not hold a standard solid sheet magnet vent cover in place. You should test your vent plate with an ordinary magnet to see if they are attractive to magnets before placing an order. If they are not attractive to magnets, you will need to do something to allow your vent covers to stick magnetically. Here is where our Magna-Mount material comes in handy.

    Magna-Mount sheeting looks like sheet magnet but it will not stick to a steel surface. It is designed to be attractive to magnets so magnets will stick to Magna-Mount like they stick to steel. This sheeting is about as thin as a dime and has a white front surface and a self-adhesive back. We cut it into strips to fit the flat area around the outside edge of your vent plate. You simply cut the strips to the proper length with ordinary scissors one at a time, peel off the protective paper to expose the adhesive and then stick the strips around the outside edge of the vent plate. Do not stick them on the ceiling next to the vent but right on the flat front of the vent plate. These strips will stay in place all year and not impede the flow of air. We will make you a custom magnetic cover that is light weight with magnet only at the outside edge to make good solid contact with the Magna-Mount strips. The magnet on the cover is 60 mil thick, heavy duty sheet magnet. The rest of the vent cover is thin light weight white heavy duty vinyl sheeting. This material is strong enough to stop the drafts but light enough to be held in place with only the magnet and the Magna-Mount strips. A sheet of solid 30 mil sheet magnet covering the entire vent would fall off due to the greater weight of the cover and the lack of sufficient magnetically attractive surface to stick to.

    Magnet Vent Cover

     

    There are many sizes of vents and with some installations, there is pressurized air coming out of the vent. Pressurized air may actually force the vent cover off. If the vent is too large or the width of the flat surface around the vent is too narrow to allow for sufficient Magna-Mount, a magnetic vent cover may not hold, even our special light weight cover. Only you can judge if our covers will work for your application. All vent covers are custom made and are non-returnable and non-refundable.

    Because some vents are rather large, special covers are sometimes shipped rolled up. This will require the customer to apply some of the sheet magnet strips to the edge of the vent cover. This is easy and quick and allows us to ship the magnet in a flat condition which will allow it to make good solid contact on your vent.

    All vents are made differently and ceiling vents can be more difficult to cover with magnetic covers because they are flat against the ceiling and gravity pulls down so much more strongly on the entire magnet at the same time. 30 mil sheet magnet is not light. If there is not enough flat steel on the vent to hold the magnet, it can fall easily, especially if there is air pressure behind the cover. For this special need we have created our special lightweight magnetic ceiling vent covers. They are made of heavy duty white sheet vinyl with a border of solid 60 mil sheet magnet around the outer edge. This magnet will make good solid contact with the flat steel of the vent. Magnet touching the thin edges of the louvers of the vent will do little to hold the magnet's weight. Only magnet touching flat steel will hold the cover. Be sure to test your vent with a magnet to make sure it is steel. Carefully measure your vents before placing your order. Our covers will fit only as well as you measure.

    This is a custom item, please contact us with your request or call us at 724-352-3747.

  • How Prices are Determined
    Prices are determined by the size of your vent in square inches. Multiply the height by the width and then multiply by $.04. This will give you the price for the vent cover before shipping is added. The Magnamount strips are $3.00 per vent regardless of size.

  • Non-returnable, non-refundable
    Vent covers are a custom cut product. They cannot be returned for a refund. Please be sure of your measurements before you place your order. The magnet must make good solid contact with the flat areas of the vent where the Magna-Mount has been applied. Screw heads sticking up may hold the prevent the Magna-Mount from laying flat on the vent and force the magnet cover away from the flat surface of the vent, preventing it from sticking. Screws with countersunk heads should be substituted for raised screw head screws. Control handles for vents can be in the way of the cover and keep it from sticking to the flat areas. All vents are different and we have no way of knowing if this vent cover will solve your particular vent problem. Please make all necessary tests to determine the usability of our vent cover for your purposes before ordering. The responsibility for determining if our vent cover is what you want, rests with you.

  • Additional Shipping Charges May Apply
    On some larger sizes, vent covers must be shipped via UPS and the shipping costs are higher than standard Priority Mail shipping. Be sure to ask about the shipping charge when placing your order.

  • All Air Conditioning and Heating Vents Are Not Created Equal
    Some vents are flat and others are curved and multi-layered. Some have a vent control handle in the center or off to one side. Some are plastic or aluminum while most are steel. Some have more thin louvers than others and some have more flat surface area than others. It is necessary for the vent to have sufficient flat areas for the Magna-Mount strips to stick to. Unfortunately, we can not accept returns for custom cut vent covers.
  • Contact us to order your vent covers today!
    Please mention the style of vent cover when contacting us.